
Sprinkler, Hydrant & Fire Pump Installation (Fire Fighting Contractor)
Also called: fire fighting contractor, firefighting contractor, sprinkler installation, fire pump installation, hydrant system installation
NLS Contractors installs sprinkler, hydrant and fire pump systems in Riyadh, Jeddah, Dammam and Khobar and across the Kingdom: sprinkler grids, risers and standpipes, hydrants, hose cabinets and pump sets with fire water tank connections. Work follows NFPA 13, 14, 20 and 24 and SBC 801, with Civil Defense acceptance support and test certificates at handover.
A fire protection package is built to be inspected. Civil Defense reviews the design, watches the tests and accepts or rejects the system, so the work is organised around the documents they ask for. The scope covers the sprinkler grid and its risers, standpipes and hose cabinets, external hydrants, the fire pump set and the connections to the fire water tank.
NFPA 13 governs sprinklers, NFPA 14 standpipe and hose systems, NFPA 20 fire pumps and NFPA 24 the underground fire mains that feed a site. SBC 801 is the Saudi fire protection code that ties them to the building. The hydraulic calculation, shop drawings and device approvals are submitted before pipe goes up, and what is installed has to match what was approved.
A fire pump set usually has a duty pump, a standby pump and a jockey pump that holds line pressure. Controllers, the test header, suction and discharge piping and the tank connection complete it. The performance test under NFPA 20 runs the pump at shutoff, at rated flow and at 150 percent of rated flow, and records pressure and current at each point. A pump that misses its curve holds up the building's acceptance, so the test is planned early with water and power ready.
Hydrostatic acceptance testing under NFPA 13 holds the sprinkler pipework at test pressure for the duration the standard sets, with no leakage. Underground mains are flushed before connection, then tested. Flow switches and tamper switches are wired to the fire alarm panel, so the sprinkler and alarm contractors need to agree who connects what.
Fire pumps, controllers and panels can be client-supplied or sourced through NLS Power, then installed and tested in the same offer. Price depends on protected area, hazard class, pipe sizes, pump rating and site conditions. Lead time depends on scope and the offer states it. Send the fire drawings, hydraulic calculations, equipment schedule, specification, BOQ and the site city. Design approval by Civil Defense is led by the owner's consultant, and the test records support the inspection.
Specifications
- ✓Scope: sprinkler grids, risers and standpipes, hydrants, hose cabinets, fire pump set and tank connections
- ✓Pump set: duty, standby and jockey pumps with controllers
- ✓Standards: NFPA 13, NFPA 14, NFPA 20, NFPA 24, SBC 801
- ✓Tests: hydrostatic acceptance per NFPA 13, pump performance per NFPA 20
- ✓Approvals: Civil Defense design approval and acceptance test support
- ✓Handover: hydraulic calculation set, shop drawings, test certificates, as-builts
Frequently Asked Questions
Who obtains Civil Defense approval for a sprinkler system?+
Design approval normally runs through the owner's consultant. The contractor submits shop drawings, hydraulic calculations and material approvals, and supports the inspection and the acceptance test with records.
What does the fire pump flow test involve?+
Running the pump at shutoff, at rated flow and at 150 percent of rated flow, recording pressure and current at each point, and comparing the results with the pump curve. Water and power must be ready on the day.
Can you install fire pumps that the client supplies?+
Yes. Setting the pump set, piping, test header, controller connection and testing is a normal scope. Panels and pumps are also available through NLS Power.
How does the sprinkler system connect to the fire alarm?+
Flow switches and valve tamper switches are wired to the fire alarm panel. The sprinkler and alarm packages agree who supplies, mounts and connects each device.
Is NLS Contractors a fire fighting contractor in Saudi Arabia?+
NLS Contractors takes sprinkler, hydrant and fire pump installation as a works package, to NFPA 13, 14, 20 and 24 and SBC 801. Pipework, pump sets and fire water tank connections are priced from the BOQ and built from specialist installer and supplier quotes, and the offer states how Civil Defense acceptance support is handled.
Who supplies Sprinkler, Hydrant & Fire Pump Installation (Fire Fighting Contractor) in Saudi Arabia?+
NLS Contractors (Northlane Solutions Company) supplies Sprinkler, Hydrant & Fire Pump Installation (Fire Fighting Contractor) across Saudi Arabia, including Riyadh, Jeddah, Dammam and Jubail. Send your specification and quantities to info@nlscontractors.com or info@northlanesolution.com for a quotation.
Related products

Testing, Adjusting & Balancing (TAB) and HVAC Commissioning
NLS Contractors delivers testing, adjusting and balancing (TAB) and HVAC commissioning as a works package in Riyadh, Jeddah, Dammam and Khobar: airflow and water flow measurement, balancing to design values and functional testing, using NEBB or AABC procedures as specified and ASHRAE Guideline 0. Handover includes TAB reports, balancing sheets, functional test records and a commissioning report.

Split, VRF & Packaged AC Installation
NLS Contractors installs split, VRF and packaged air conditioning in Riyadh, Jeddah, Dammam and Khobar and across the Kingdom. Scope covers indoor and outdoor units, refrigerant piping tested under pressure and vacuum, condensate drains, control wiring and power connection, to SBC 501 and SBC 601. Handover includes piping layouts, test records, commissioning sheets and as-builts.

Chilled Water Piping & Plant Rooms
NLS Contractors installs chilled water piping and plant rooms in Riyadh, Jeddah, Dammam and Khobar: chillers, pumps, heat exchangers and cooling towers where used, with carbon steel or HDPE pipework, valves, insulation and vibration isolation. Piping follows ASME B31.9 and SBC 501. Handover includes isometrics, test records, flushing certificates and as-builts.

Ductwork & Ventilation Installation
NLS Contractors installs ductwork and ventilation in Riyadh, Jeddah, Dammam and Khobar: galvanised and pre-insulated duct, fire and smoke dampers, grilles and diffusers, AHUs, fans, kitchen and toilet extract, and stair pressurisation fans. Work follows SMACNA, NFPA 90A and SBC 501, with leakage and damper tests recorded for handover.
