NLS Contractors
Structural Steel Fabrication & Erection

Structural Steel Fabrication & Erection (Steel Structure Contractor)

Also called: steel fabricator, steel structure contractor, structural steel erection, steel fabrication and erection, steel erection subcontractor

NLS Contractors delivers structural steel packages in Riyadh, Jeddah, Dammam and Khobar and across the Kingdom: columns, beams, trusses and bracing, from shop drawings through coating and erection. Design follows AISC 360 with loads per SBC 301, and welding follows AWS D1.1. Handover includes mill certificates, weld maps, NDT and coating records, and as-built drawings.

A structural steel package covers more than the weight of steel on the truck. It starts with shop drawings built from the consultant's structural drawings, runs through cutting, welding, blasting and coating, and ends when the last bolt on the last connection is tightened and signed off. The scope is columns, beams, trusses, bracing, base plates and connections, fabricated and erected as one package so a single party answers for how the pieces fit on site.

Design and execution references sit in the specification, and the offer is priced to them. AISC 360 governs the design of the frame, loads come from SBC 301, and welding follows AWS D1.1, with welding procedures and welder qualifications in place before production starts. Some specifications add EN 1090-2 and name an execution class. Material is called up by grade, for example ASTM A572 Gr 50 or EN 10025 S355, and each mill certificate has to trace back to the steel that arrives.

Protection is a line item of its own. ISO 12944 sets corrosivity categories, and a coastal site in Jeddah, Dammam or Khobar needs a higher category than an inland one in Riyadh. The specification chooses between a multi-coat paint system and hot-dip galvanising to ISO 1461 or ASTM A123. The choice changes fabrication, because galvanised members must fit the bath and carry vent and drain holes. Coating thickness is measured and logged, member by member.

Erection depends on the site as much as the steel. The offer states how the steel arrives, which crane lifts it, what access the site gives, and who surveys the anchor bolts and base levels before the first column goes up. A bolt set out of position holds up the whole frame, so the as-built survey of the foundations is requested early.

Price follows tonnage, section sizes, connection complexity, the protection specification, crane and access, and transport distance, and the offer lists its assumption on each. Lead time follows the same inputs and is stated in the offer. Steel sections and plate can be sourced through NLS Industries when the client is not supplying them. To quote, send the structural drawings or the preliminary scheme, the grade and protection specification, the erection programme and the site city.

Specifications

  • ✓Scope: columns, beams, trusses, bracing, base plates and connections, fabricated and erected
  • ✓Design and loads: AISC 360 for design, SBC 301 for loads
  • ✓Welding: AWS D1.1, with an EN 1090-2 execution class where the specification calls for it
  • ✓Material: ASTM A572 Gr 50, EN 10025 S355 or the grade the specification names
  • ✓Protection: ISO 12944 category by site, or hot-dip galvanising to ISO 1461 or ASTM A123
  • ✓Handover: shop and erection drawings, mill certificates, weld maps, NDT and coating records, as-builts

Frequently Asked Questions

What do I send to get a structural steel quote?+

Send the structural drawings or the preliminary scheme, the steel grade and protection specification, the BOQ if one exists, the erection programme and the site city. Say whether the steel is yours or supplied through the offer. The quote then lists tonnage assumptions, inclusions and exclusions line by line.

Can you erect steel that the client supplies?+

Yes. Erection of client-supplied steel is a normal scope. The offer states the delivery point it assumes, how shortages and transport damage found on receipt are recorded, and who touches up the coating after erection.

What inspection records come with the steel?+

Mill certificates traced to heat numbers, weld maps, NDT records to the extent the specification requires, coating thickness records, and the as-built drawings. The specification sets how many welds are inspected and by which method.

How long do fabrication and erection take?+

It depends on tonnage, how fast shop drawings are approved, material availability, the protection system and site access. The offer carries a programme against those inputs instead of a single number.

Is NLS Contractors a steel fabricator in Saudi Arabia?+

NLS Contractors takes structural steel as a works package in Saudi Arabia, from shop drawings through coating and erection, priced from the drawings and BOQ and built from specialist fabricator and erector quotes. The offer names who fabricates, who coats and who erects, and states the standards it works to, AISC 360 for design and AWS D1.1 for welding.

Who supplies Structural Steel Fabrication & Erection (Steel Structure Contractor) in Saudi Arabia?+

NLS Contractors (Northlane Solutions Company) supplies Structural Steel Fabrication & Erection (Steel Structure Contractor) across Saudi Arabia, including Riyadh, Jeddah, Dammam and Jubail. Send your specification and quantities to info@nlscontractors.com or info@northlanesolution.com for a quotation.

Related products

Pre-Engineered Steel Buildings (PEB)

Pre-Engineered Steel Buildings (PEB)

NLS Contractors supplies and erects pre-engineered steel buildings for warehouses, factories, hangars and showrooms in Riyadh, Jeddah, Dammam and Khobar. Frames are built-up tapered sections with cold-formed purlins and sheeting, designed to MBMA, AISC 360 and AISI S100 with SBC 301 loads. Handover includes anchor bolt plans, erection drawings, material certificates and as-builts.

Mezzanines & Access Platforms

Mezzanines & Access Platforms

NLS Contractors supplies and installs steel mezzanine floors and access platforms in warehouses, factories and plant rooms in Riyadh, Jeddah, Dammam and Khobar. Scope covers columns, beams, decking, stairs, handrails and gates, designed for live loads under SBC 301 and the actual use. Handover includes shop drawings, a calculation summary, load plaque details and as-builts.

Solar Mounting Structures

Solar Mounting Structures

NLS Contractors supplies and installs solar mounting structures for ground-mount and rooftop PV arrays in Riyadh, Jeddah, Dammam and Khobar and across the Kingdom. Galvanised posts and rails sit on piles, ground screws or concrete footings, designed for SBC 301 wind uplift and IEC 62548. Handover includes foundation drawings, galvanising certificates, pile test records and as-builts.

Roof & Wall Cladding Installation

Roof & Wall Cladding Installation

NLS Contractors installs roof and wall cladding on steel frames in Riyadh, Jeddah, Dammam and Khobar: single skin sheeting, insulated sandwich panels with PU, PIR or rockwool cores, standing seam roofs, flashings, gutters and skylights. Checks cover fire behaviour, wind uplift, water tightness and SBC 601 thermal values. Handover includes panel layouts, a fixing schedule and a water test record.

Guides

Available in

Get in touch

Send us your RFQ

Tell us what you need and we will come back with pricing and lead times.

+966 53 590 8101